DUnder ’LP’, use the P rB or AP q button to
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button when the information is
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
h To end, press the TIMER k button.
i Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a Press the TIMER k button on the remote control.
b Select the line ’Timer programming’ with the
menu buttons P rB or AP q and confirm with the
SqC button.
c Select the TIMER you want to check or change with the
P rB or AP q button and confirm with the OK
button.
d Select the entry field with the DSr or SqC
button.
e Change any information with the P rB or AP q
button or with the 0-9 buttons.
DUnder ’LP’, use the P rB or AP q button to
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMER k button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMER k button on the remote control.
b Select the line ’Timer programming’ with the
menu buttons P rB or AP q and confirm with the
SqC button.
c Select the TIMER you want to clear with the menu
buttons P rB or AP q .
d Press the CLEAR button.
e Switch off with the TIMER k button.
18
To Next Page
Loading...
