Front of the set
8 Power switch : To switch off the set
Beware: If you switch the set off with the power switch 8
, TIMER-recordings are not possible!
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P r/q
Programme number : To select programme number up or down
Sr/q
Volume: To regulate the volume
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
5
Record: To record the programme selected
G
Playback : To play a recorded cassette
?
Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette
w
Headphones socket: To connect headphones
Back of the set
EXT.1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
2
Aerial input socket: To connect the aerial cable
To Next Page
Loading...
