Philips 222E2SB/00 - Plastics Flammability; Texture;Glossing of Housing; Tilt and Swivel Base; Kensington Lock

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄ 222E2 21.5” Wide FHD LCD Monitor
2010/02/05 PHILIPS 21 of 30
222E2 LCD 73
General Product Specification
5.11 Plastics flammability
x
All Plastics to be Flame Retardant UL 94-HB or Better.
x Base / Pedestal to be Flame Retardant UL 94-HB.
x All major plastic parts (bezel, back cover) need to be molded from same resin.
x Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
5.12 Texture/Glossing of housing
x The texture area and texture no should follow Philips make-up sheet.
x The exterior surfaces shall have a uniform texture.
x Philips must approve the mold texturing.
x Detail document for texture refer to “UN-D249”, “UN-D 600”.
x Glossy surface > = 80 gloss units
5.13 Tilt and swivel base
x Tilt angle : -5 q +2/-0 q (forward)
+20 q +0°/-2°(backward)
x Swivel angle : nil
x High Adjustment : nil
x Portrait Display : nil
5.14 Kensington Lock
x Must meet Kensington_slot.spec “TYE-M0004”.
x MMD request metal plate in Kinsington hole.
5.15 Label
x Regulatory label / Carton label should follow Philips requirement.
x China RoHS label.
x Detail document refer to Philips Engineering Reference Book.