Philips 226V3LSB/00 - Scanning Frequencies

76
Meridian 3
226V3 :
LNT
Type NR. : LNT LM215WF4-TRA2
Resolution : 1920 x 1080 (WSXGA+)
Outside dimensions : 495.6(H) x 292.2(V) Typ. x 8.2(D) Typ.
Pitch (mm) : 0.248mm x 0.248mm
Color pixel arrangement : RGB vertical stripe
Display surface : Hard coating (3H)
Color depth : 16.7M (6 bit Hi-FRC)
Backlight : LED
Active area (W x H) : 479.64(H) x 268.11(V) mm
View angle (CR=10) : =170 for Right/Left (Typ)
: =160 for Up/Down (Typ)
Contrast ratio : 1000:1 (Typ)
White luminance : 250(Typ.)
Color gamut : 66% (Min.)
Gate IC : N/A
Source IC : N/A
Response time : Tr + Tf <=5 ms (Typ)
Vertical frequency range : 56~76Hz
236V3 :
LNT
Type NR. : L&T LM230WF5-TRA2
Resolution : 1920 x 1080 (WSXGA+)
Outside dimensions : 533.2(H) x 312.0(V) Typ. x 8.3(D) Typ.
Pitch (mm) : 0.265mm x 0.265mm
Color pixel arrangement : RGB vertical stripe
Display surface : Hard coating (3H)
Color depth : 16.7M (6 bit Hi-FRC)
Backlight : LED
Active area (W x H) : 509.2(H) x 286.4(V) mm
View angle (CR=10) : =170 for Right/Left (Typ)
: =160 for Up/Down (Typ)
Contrast ratio : 1000:1 (Typ)
White luminance : 250(Typ.)
Color gamut : 66% (Min.)
Gate IC : N/A
Source IC : N/A
Response time : Tr + Tf <=5 ms (Typ)
Vertical frequency range : 56~76Hz
Scanning frequencies
Hor. : 30 – 83 K Hz
Ver. : 56 - 76 Hz
Video dot rate: < 210 MHz for VGA and < 170 MHz for DVI
, warning message must be
displayed while over 165 MHz (supplier to provide accurate scaler bandwidth number)
Power input: 90-264 V AC, 50/60  2 Hz