82
Meridian 3
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over
scaler or
Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
Mode storing capacity
Factory preset modes : Refer to Timing table
preset modes : Refer to Timing table
User modes : Refer to Timing table
Timing pixel clock over H/W limitation do not support.
1. Factory preset modes and preset modes are defined in the enclosed timing table file
M3 Timing
table_20110408.xlsx
OSD/Keypad functions
ITEM
1 OSD/keypad definition
M3 MICON
SPEC_20110406.doc
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode
and recall factory preset
2 OSD Translation
OSD_String_M3_201
10322.xls
English, French, German,
Spanish, Italian, Russian,
Simplified Chinese,
Portuguese, Turkish (9)
3 Power On logo
Philips_Logo_1920x
1080.bmp
Power On Logo: Power On
Show up Philips logo 3
seconds
Change to input signal.
This picture is reference
only. The official drawing
will send out by PM.
To Next Page
Loading...
