12
• [Tint]Adjusts the colour balance in an
image.
• [Custom tint]Make a customised tint
setting. (Only available if [Tint] >
[Custom] is selected)
• [Pixel Plus HD]Fine-tunes each pixel to
match surrounding pixels. This produces a
brilliant, high-definition image.
• [Dynamic contrast]Automatically
enhances contrast in an image. A
[Medium] setting is recommended.
• [Dynamic backlight]Adjusts the
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]Smoothes
out transitions on digital pictures.
You can switch this feature on or off.
• [Colour enhancement]Makes
colours more vivid and improves the
resolution of details in bright colours.
You can switch this feature on or off.
• [PC mode]Adjusts the picture when a PC
is connected to the TV via HDMI or DVI.
• [Light sensor]Dynamically adjusts picture
settings to match lighting conditions.
• [Picture format]Changes the picture
format.
• [Horizontal shift]Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
• [Vertical shift]Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Change picture format
1 Press FORMAT.
A picture format bar appears. »
2 Press or FORMAT to select a
picture format.
The selected picture format is »
activated.
3 Press OK to confirm your choice.
• [Personal]Lists customised personal
picture settings.
• [Vivid]Maximises picture settings.
• [Standard]Adjusts picture settings
to suit most environments and types
of video.
• [Movie]Applies picture settings
ideally suited for movie viewing.
• [Game]Applies picture settings
maximised for fast-moving games.
• [Energy saving]Applies low-energy
picture settings.
3 Press OK to confirm your choice.
The selected smart picture setting is »
applied.
Manually adjust picture settings
1 Press (Home).
2 Press to select [Setup] >
[Picture].
3 Press to select one of the
following picture settings.
• [Smart picture]Accesses pre-defined
smart picture settings.
• [Contrast]Adjusts the intensity of bright
areas, keeping dark areas unchanged.
• [Brightness]Adjusts the intensity and
details of dark areas.
• [Colour]Adjusts colour saturation.
• [Hue]Compensates colour variations in
NTSC encoded transmissions.
• [Sharpness]Adjusts the level of sharpness
in image details.
• [Noise reduction]Filters and reduces
noise in an image.
Picture
Sound
Features
Installation
Software update
Settings assist.
Smart picture
Contrast
Brightness
Colour
Hue
Sharpness
Noise reduction
Action
Personal
Off
EN
To Next Page
Loading...
