14
When enabled, this produces a more
consistent audio volume.
• [Delta volume]Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change
the delta volume.
Tip
For • [Vol.vis impaired] audio, toggle AD or
press
to select speaker, headphone or
both. Select [Off] to disable Audio Descriptor.
(Applies to UK only)
Use advanced teletext
features
Access the teletext options menu
Most of the advanced teletext features are
accessed via the teletext options menu.
1 Press MHEG/TELETEXT.
The teletext screen appears. »
2 Press OPTIONS.
The teletext options menu appears. »
3 Press to select one of the following
options.
• [Freeze page]Freezes the current
page.
• [Dual/Full screen]Enables and
disables dual screen teletext, which
splits the current channel or source
to the left of the screen, with
teletext on the right.
• [Reveal]Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [Cycle subpage]Cycles through
subpages automatically if subpages
are available.
• [Language]Switches to a different
language group to display a language
correctly when that language uses a
different character set.
4 Press OK to confirm your choice.
5 Press MHEG/TELETEXT to exit the
teletext options menu.
Adjust sound settings
1 Press (Home).
2 Press to select [Setup] > [Sound].
The » [Sound] menu appears.
3 Press to select one of the
following sound settings.
• [Smart sound]Accesses pre-defined
smart sound settings.
• [Bass]Adjusts the bass level.
• [Treble]Adjusts the treble level.
• [Volume]Adjusts the volume.
• [Vol.vis impaired]Sets the mix of
visually impaired audio with regular
audio. When available, visually
impaired audio includes audio
descriptions of on-screen action. You
can also enable this by pressing AD
(Audio Descriptor).
• [Balance]Adjusts the balance of the
right and left speakers to best suit
your listening position.
• [Audio language]Available for digital
channels, when multiple languages
are broadcast. Lists available audio
languages.
• [Dual I-II]Selects between audio
languages if dual sound is broadcast.
• [Mono/Stereo]Selects between
mono or stereo if stereo is
broadcast.
• [TV speakers]Turns TV speakers on
or off.
• [Surround]Enables spatial sound.
• [Headphone volume]Adjusts
headphone volume.
• [Auto volume]Automatically
reduces sudden volume changes, for
example, when switching channels.
Picture
Sound
Features
Installation
Software update
Standard
Smart sound
Bass
Treble
Volume
Vol.vis impaired
Balance
Audio language
Dual I-II
English
Dual I
EN
To Next Page
Loading...
