Setting USB docking Ethernet
1. Open “Network Connections” window
On Windows 8, Windows 7 or Windows Vista,
type “ncpa.cpl” into the Start menu search box:
On Windows XP, from the Start button, select
Connect To -> Show all connections
2. The Network Connections window opens.
Locate and select the “231P4U USB Ethernet“
for preferred network source.
3. Right click on the 231P4U USB Ethernet icon
and click “Enable”, now you can surf the internet.
Note
While connecting the Ethernet from USB
docking display, USB upstream connection
by USB cable between laptop and display is
required.
Setting USB docking Audio source
1. Click the DisplayLink icon, then select
“Audio Setup” as shown below illustrator
To Next Page
Loading...
