Philips 241V8 User Manual

9
2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
1920 × 1080 @ 60 Hz. When the monitor
is powered on at a different resolution,
an alert is displayed on screen: Use
1920 × 1080 @ 60 Hz for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
Physical Function
Tilt
20
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Press the release button to detach
the base stand away from the base
column.
2
1
3. Press the release button to detach
the base column.
3

Philips 241V8 Specifications

General

Screen Size	23.8 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Refresh Rate	75 Hz
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
VESA Mount	100 x 100 mm
Viewing Angles (H/V)	178°/178°
Built-in Speakers	No
Connectivity	HDMI, VGA
Color Support	16.7 Million
Response Time	4 ms (GtG)
Power Consumption	16.5 W (typical)