Philips 243V7 - Resolution Notification

9
2. Setting up the monitor
Note
This display has "DPS" for ECO design,
the default setting is "ON" mode: it
makes the screen looks slightly dim; for
optimum brightness, enter to the OSD
to set "DPS" to "OFF" mode.
Main menu Sub menu
Picture
OSD Setting
Setup
Language
Color
Input
Picture Format
Brightness
Contrast
Horizontal
Vertical
Transparency
OSD Time Out
H.Position
Auto
V.Position
Phase
Clock
Resolution Notification
Reset
Information
English, Deutsch, Español, Ελληνική, Français,
Italiano, Maryar，Nederlands, Português,
Português do Brasil，Polski，Русский ,Svenska，
Suomi，Türkçe，Čeština，Українська, 简体中文,
繁體中文，日本語，한국어
Color Temperature
sRGB
User Define
VGA
DVI (243V7QS, 243V7QDS, 243V7QDA)
HDMI (243V7QDS, 243V7QDA, 243V7QJA)
DisplayPort (243V7QJA)
SmartResponse
(243V7QDS, 243V7QDA, 243V7QJA)
SmartContrast
Gamma
Over Scan
(243V7QDS, 243V7QDA, 243V7QJA)
Pixel Orbiting
Wide Screen, 4:3
0~100
0~100
Sharpness
0~100
0~100
0~100
Off, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
0~100
On, Off
DPS
On, Off
Yes, No
0~100
0~100
0~100
6500K, 7500K, 9300K
Red: 0~100
Green: 0~100
Blue: 0~100
Off, Fast, Faster, Fastest
On, Off
1.8, 2.0, 2.2, 2.4, 2.6
On, Off
On, Off
LowBlue Mode
On
Off
1, 2, 3
Audio
(243V7QDS,
243V7QDA,
243V7QJA)
Audio In, HDMI,
DisplayPort (243V7QJA)
Stand-Alone
(243V7QDA, 243V7QJA)
0~100
On, Off
On, Off
Volume
(243V7QDS, 243V7QDA, 243V7QJA)
Audio Source
(243V7QDA, 243V7QJA)
Mute
(243V7QDS, 243V7QDA, 243V7QJA)
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
1920 × 1080 @ 60 Hz. When the monitor
is powered on at a different resolution,
an alert is displayed on screen: Use 1920
× 1080 @ 60 Hz for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20