10
2. Setting up the monitor
2.3 Remove the Base Assembly
for VESA Mounting
Remove the Base Stand
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface, taking care to avoid
scratching or damaging the screen.
2. Press the locking clips to detach
the base stand away from the base
column.
1
3. Press the release button to detach
the base column.
2
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
100mm
100mm
To Next Page
Loading...
