5
Disassembly
• To remove the Exhaust lter (12):
Turn the appliance upside down, push the blue
button and remove the Exhaust grill (13), now
the Exhaust lter can be removed / replaced by
a new one. (see picture)
1
2
• Remove the dustcover assy (7) using a
screwdriver (see picture).
• To remove the Top housing:
Remove the 3 screws (B). (see picture)
B
B
B
• Turn the appliance upside down and remove
the 3 screws (C) on the bottom (underneath the
Exhaust grill). (see picture)
C C
C
C
• Lift the Top housing by using a screwdriver on
the backside, place it between Lower housing
and Top housing.
(Remark: buttons do not need to be removed).
• When you take o the upper housing you have
to be careful that the connector of the potmeter
is not disconnected. Remove the connection for
the potmeter then the housing can be removed.
Disassembly- and Reassembly advice
To Next Page
Loading...
