Philips 32HFL5850D/10 - Page 25

Service Modes, Error Codes, and Fault Finding
EN 25Q522.2HE LA 5.
2010-Jun-30
Figure 5-7 “Active” to “Semi Stand-by” flowchart (non-DFI)
Semi Standby
Active
action holder: AVC
autonomous action
action holder: St-by
Wait 250ms (min. = 200ms)
Mute all sound outputs via softmute
Mute all video outputs
Switch “off” LCD backlight
Force ext. audio outputs to ground
(I/O: audio reset)
and wait 5ms
Switch “off” the display by sending the
PanelConfig.PanelOff (I²C) command to the Pacific
Switch “off” ambient light
Set main amplifier mute (I/O: audio -mute)
Wait 100ms
I_18010_071.eps
110608