English - 2 -
Installing the Stand & Uninstalling the Stand
Please read the following information carefully
before attaching the stand to your new Television.
1. Before fitting the stand, ensure that the TV is
unplugged from its power source.
Place the TV on a soft, stable and at surface, facing
down.
Place the Stand on the stand mounting pattern on the
rear side of the TV.
Ensure the Stand is placed correctly and that you can
see the screw holes on the back of the Television.
Insert the four screws provided and tighten them gently
until the stand is properly tted (g.1).
Please read the following information carefully
before detaching the stand of your Television.
2. Before detaching the stand, ensure that the TV is
unplugged from its power source.
Place the Television on a soft, stable and at surface,
facing down.
Unscrew gently the four screws that attach the foot
assembly and remove the screws when they are
completely unscrewed.
Remove the stand gently from the panel (g.2).
g.1
g.2
Getting Started
To Next Page
Loading...
