Philips 32PFL4664/F7 - Page 23

4-11 PL19.00-B_DC
Screw Torque Specification
*: For reference
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
Ref.
No.
Part
Number
Part Name ID. No.
Tightening
Torque
L010 GCHP3120
SCREW F-PAN BLACK_NI
+P-TITE M3X12.0 3X12
WASHER HEAD+BLK
S-2
5.6±0.9lb·in
L023 GBJS3060
SCREW BIND 3CHROM +S-
TITE M3X6.0 M3X6 BIND
HEAD+
S-5
L028 GCHS3080
SCREW F-PAN BLACK_NI
+S-TITE M3X8.0 3X8
WASHER HEAD+BLAC
S-3
L149 2EML00060
SCREW F-PAN BLACK_NI
+P-TITE M3X7.5
3X7.5WASHER HEAD+BLK
S-4
L147 2EML00056
ASSEMBLED SCREW (D6.4
2.6X6 BIT2) ACLF0UT-32HS
S-6 3.5±0.4lb·in
SSK1 2ESA06068
STAND SCREW KIT
ACLFBUT-32HL(SCREW
BIND BLACK_NI +P-TITE
M4X18.0 M4X18 BIND
HEAD+)
S-1
(approx.
8.7±0.9lb·in)
*
[6] IR Sensor
CBA Unit
[7] LCD Panel
Assembly
[5] Speaker
[2] Rear Cover
[1] Stand
Assembly
[8] Front Cabinet
[4] Digital Main
CBA Unit
[3] WiFi Module
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 2(S-1) ---
[2] Rear Cover
D1
W1
2(S-2), 3(S-3),
8(S-4), CN601,
AC Cord Cover,
AC Cord
---
[3]
WiFi
Module
D2 CN3702, Cushion ---
[4]
Digital Main
CBA Unit
D2
W1
6(S-5), CN1001,
CN3501, CN3801,
CN3802, CN3901,
Function Knob
---
[5] Speaker D3 ---------- ---
[6]
IR Sensor
CBA Unit
D3
W1
Sensor Lens, Sensor
Shield
2
[7]
LCD Panel
Assembly
D4 7(S-6) 1
[8]
Front
Cabinet
D4
Cell Cushion, Gasket,
Grand Tape
2, 3
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)