5.2- Use the quick access menu
The quick access menu gives direct access to some often needed menu
items.
Note
When digital channels are installed and broadcast, the relevant digital
options are displayed in the quick access menu.
1. Press OPTION on the remote control.
\
2.
0EM0
OPTION
/F, X
S
Press A or T and then OK to access one of the following menus:
• Audio language
For digital channels only, where multiple audio languages are
broadcast.
• Closed captions
See View closed captions (subtitles) on page 21.
• Picture format
See Change picture format on the next page.
• Equalizer
See Change sound settings on page 15.
• Clock
See Set the dock on page 17,
5.3 Change picture and sound settings
Change picture settings
This section describes how to adjust your picture settings.
1. Press MENU on the remote control.
EXIT/
Press _ to enter the TV settings menu.
TV menu TV settings
TV settings
3. Press T and _ to select the Picture menu.
TV menu
TV Settings Picture
PHILIPS
4.
5.
:_Available in selected models
Press A or T to select one of the picture settings, and press _ to
enter the setting.
Press A or _' to adjust the setting, and press _l or OK to confirm
the change.
6. Press Menu to exit.
Change picture settings by using the setting assistant
This section guides you through a picture settings wizard.
1. Press MENU on the remote control.
EXIT/
\ J
2. Press _ to enter the Settings assistant menu.
TV menu IInstallation PHILIPS
TV settings Settings assistant
3.
Press _ to highlight Start now, and press OK to start the Settings
assistant.
You are guided through a choice of picture display options. Press
the color keys, cursor keys and OK to make your selections and
store your setup.
EN-I3
To Next Page
Loading...
