Philips 32PFL5403D - Channel Installation and Management; Automatic and Manual Channel Tuning

5.11 Use yourTV in HDTV mode
Not all models can be configured in HDTV mode. For information
about your set,seethe specification.
When you connect a high definition (HD) device to your TV, you
must configure the display format of your TV. You might also have to
configure the display format of your HD device. For information about
configuring your device, see the documentation of the device.
Supported video formats
The following video formats are supported in HDTV mode:
Resolution Refresh rate
640 x 480p 60Hz
720 (1440) x 480i 60Hz
720 (1440) x 576i 50Hz
720 x 480p 60Hz
720 x 576p 50Hz
1280 x 720p 50Hz, 60Hz
1920 x 1080i 50Hz, 60Hz
1920 x 1080p _ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
_'1080p is supported in selected models only
Note
YourTV is HDbll compliant. If you do not get a good picture, change
the video format on your connected devices.
Configure yourTV in NDTV mode
1. Connect the HD device to your TV as described in Connect your
devices on page 31.
2. Press MENU on the remote control and select Features > Mode
Selection.
TV...... PHI LIPS
Features Mode Selection
5.12 Use yourTV as a PC monitor
For information how to connect a PC to yourTV see Connect a PC on
page 33. Use an HDMI-DVl cable or an HDMI-DVl adaptor. For sound,
add an audio cable with a stereo mini jack.
Caution
Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supported screen resolutions
The following screen resolutions are supported in PC mode:
Resolution Refresh rate
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
1280 x 768 60Hz
1280 x 1024 60Hz
1360 x 768 60Hz
1920 x 1080 * 60Hz
_'1080p is supported in selected models only
If necessary, you can adjust the picture position to the center of the
screen with the cursor buttons.
Configure yourTV in PC mode
1. Connect the PC to yourTV as described in Connect a PC on page
33.
2. Press MENU on the remote control and select Features > Mode
Selection.
_ TV .... PHILIPS
Features Mode Selection
Mode Selection
3. Select NDTV and press < to confirm your choice.
4. If necessary, adjust the TV picture settings as described in Change
picture and sound settings on page 13.
5. Press MENU to exit.
Note
Mode Selection item only appears for the following input signals:
- 720x480p@60 Hz
- 1280x720p@60 Hz
- 1920x1080p@24/25/30/50/60 Hz
3. Select PC and press OK to confirm your choice.
4. If necessary, adiust the picture settings as described in Change picture
settings on page 13.
O
5.
Tip: Set the picture format to Unscated when using wide-screen PC
resolutions.
Press MENU to exit.
Note
Mode Selection item only appears for the following input signals:
- 720x480p@60 Hz
- 1280x720p@60 Hz
- 1920x1080p@24/25/30/50/60 Hz
EN-24