Mechanical Instructions
EN 21Q552.1L LA 4.
2010-Dec-29
back to
div. table
11. Remove the Ambilight PWBs as earlier described.
12. Tilt the Ambilight subframes [5] after having removed the
screw.
Now the LCD Panel can be lifted from the front cabinet.
Figure 4-29 LCD Panel
Pay special attention to use the correct screws at the
proper location when mounting a new LCD panel!
Using the wrong screws will damage the LCD panel!
4.7 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position.
• Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
18771_112_100504.eps
100504
4
3
3
3
3
4 4 4
22
5
2
5
2
1
To Next Page
Loading...
