To Next PageTo Next Page
Need help?Do you have a question about the Philips 42PFL6678S/12 and is the answer not in the manual?
Provides links to online product support, including product information, getting started guides, user manuals, FAQs, and software.
Details the various input and output connections available on the TV set, including side and rear views.
Outlines essential safety regulations and precautions required during and after repair, including isolation transformers and component replacement.
Details the procedures for safely removing and disassembling major assemblies and the display panel.
Identifies key test points and conditions for measuring signals, noting the difficulty with digital signals on standard oscilloscopes.
Explains the different service modes (SDM, SAM, CSM) and how they are activated and exited.
Documents the start-up diagrams, illustrating the sequence of operations and required supplies during the TV's power-on process.
Explains the error code buffer mechanism, how errors are logged, and the blinking LED procedure for fault diagnosis.
Describes the procedure for blinking LEDs to indicate Layer 1 and Layer 2 errors, and how to activate it via CSM or SDM.
Details various software protections related to supplies and safety mechanisms that trigger protection modes.
Provides guidance on fault finding, including NVM initialization, option code adaptation, and USB upload/download procedures.
Explains how to upgrade the main software and standby software using a USB stick, including manual and backup application methods.
Specifies the required conditions for performing electrical adjustments, including power supply voltage and warm-up time.
Details software alignment procedures, including setting picture parameters and performing white point adjustments.
Explains how the microprocessor communicates with I2C ICs and how option numbers are set and stored.
Outlines the critical process of resetting the NVM on a repaired SSB and setting service type and production code.
Describes the power supply unit as a black box for service, emphasizing ordering new boards and replacing fuses correctly.
Illustrates the wiring diagram for the 40" series of the chassis.
Presents the wiring diagram specific to the 42" and 47" 6xxx series models.
Details the wiring diagram for the 55" 6xxx series models.
Circuit diagrams for Wireless LAN USB module, light sensor, and IR/LED.
General