Philips 46HFL5573D/10 - Start Download

MediaSuite xxHFL5573D/10 Page 45
English
[Program Info]
This function is to set the necessary DVB
parameters to locate the proper RF
download channel :
*[Frequency] Frequency of MUX (default:
0706)
*[Medium] Cable or Antenna (DVB T/C)
[Service ID] # # # # # (00001)
[ONID] # # # # # (00001)
[NID] # # # # # (00001)
[TSID] # # # # # (00001)
**[Symbol Rate] # . # # # (6.900)
**[Modulation] QAM16, QAM32, QAM64,
QAM128, QAM256
*Mandatory items, **Mandatory items, but DVB-C only
Above parameters must match head-end configuration
Start Download
To manual start a RF download action:
1. select [RF Download] and press
OK.
2. select [Start Download] and press
OK.
The download action will start and search
if valid content is found on the RF network.
Automatic download will start every day at 4.00AM, 1.00PM.