Philips 5000 LATTE GO User Manual

PHI 5000 LATTE GO / GO+
General Information
Description Value
Housing material ermoplastic material
Size (w x h x d) 221 x 340 x 430 mm (data may vary depending on the model)
Weight 7,6 kg (data may vary depending on the model)
Power Cord length 1200 mm
Cup size Up to 145 mm
Water tank 1.8 litres - Removable type
Water leter Acquaclean lter 12NC-421944082321 (CA6903/00)
Coee bean hopper capacity 250 g
Coee grounds drawer capacity 15
Milk carafe capacity 265 ml
Energy Eciency Label A
Energy saving mode consumption < 1 Wh
Pump pressure 15 bar
Boiler Stainless steel type
Safety devices ermal fuse
Nominal voltage - Power rating –
Power supply
Data stored on the below label placed inside the service door
Serial Number TW90xxyy249872
TW90= product + production location - xxyy = year & Production week - 249872 = unique following
number
Technical specication
Description Value
Power supply and output: 230 V~ 50/60 Hz 1850 W
Power consumption: During heating phase- approx. 5.6 A
Coee heat exchanger output: Stainless steel (230 V~) 1900 W
for coee, hot water and steam dispensing
Safety system:
2 thermostats at 190°C one shot
Temperature monitoring:
(NTC) variable resistor sensor - transmits the value to the electronic card
Automatic dosage: Dose adjustment controlled by the electronic system
Gear motor:
2 rotation directions; power supply 24VC
Coee grinder: Direct current motor with at ceramic grinder blades
Pump: Ulka Type EP5/S GW approx. 13-15 bar with reciprocating piston and thermal switch 100°C 48 W, 230V, 50
Hz,
Overpressure valve: Opening at approx. 16-18 bar
Water circuit lling time: Approx. 15 sec Max. on rst lling cycle
Approx. 15 sec Max. on rst lling cycle Approx. 45 sec.
Grinding time: Approx. 8-10 sec.

Philips 5000 LATTE GO Specifications

General

Brand	Philips
Model	5000 LATTE GO
Category	Coffee Maker
Language	English