Philips 55PUS7272/12 User Manual

- direct-view LED with 2D-dimming: PSDL power panel.
PSL stands for Power Supply with integrated LED-drivers.
PSLS stands for a Power Supply with integrated LED-drivers with added Scanning functionality (added microcontroller).
PSDL stands for a Power Supply for Direct-view LED backlight with 2D-dimming.
6.3 DC/DC Converters
The on-board DC/DC converters deliver the following voltages(depending on set execution):
• +3V5-SB, permanent voltage for the Stand-by Power system and WIFI
• +3V3-STANDBY,voltage for IR/Key board
• +12V, input from the power supply for the panel common(active mode)
• +12V, input from the power supply for LNB supply
• +3V3-EMMC, +V-EMMC-IO, voltage for EMMC when TV on
• +1V5-DDR, +VREF-A2-DQ,, +VREF-A2-CA, voltage for DDR
• TUNER_3V3, supply voltage for tuner
• +5V-SW, input intermediate supply voltage for USB Power
• +12V-AUDIO1 for the AUDIO AMP
• +3.3VA_T2, +1.2V_T2 voltage for Demodulator IC channel decoder
• +3V3-WIFI,voltage for WIFI
6.3.1 Power tree
+12V
+2V5-NT
RT7277GSP
G5318RE1D
+1V1-NT
+12V
+12V
+1V8-NT
SY8104ADC
46 mA at standby mode.
260 mA
NT72333/ DDR 1.1V
NT72333/ VDD2.5V
NT72333/ Core 1.1V
NT72333/ DDR 1.8V
G5318RE1D
MP8124DF
TUNER_LNB
+12V
Tuner/ VCC for LNB
(Satellite)
+12V
+5V_SW
+12V
51 mA at standby mode.
T-CON/ Panel VCC
+3V5-SB
+12V
RT7277GSP
+12V
DV12
AZ1117D-3.3
USB/ +5V-USB
CI/ VCC
+3V3_TUNER
RT8079ZQW
+1V5-DDR
MT5593U+/ DDRV
+5V_SW
+5V_SW
TUNER/ TU3.3V
DDR (X 5)/ VDD
+3V5-SB
RT9048GSP
+3V3-WIFI
RT9193-33GB
+3V5-SB
+3V3-STANDBY
MT5593U+/ AVDD33-ETH
WiFi & BT/ VCC
RT9187GSP
+3V5-SB
MT5593U+/ AVDD33-STB
+3V3-LAN
power for RC off
AUDIO/ VCC
G5318RE1D
+1V0-VCCK
MT5593U+/ AVDD10_DDR
MT5593U+/ VCCK
+12V
RT7297CHZSP
+12V
+3V3/ +3V3-AVDD
DEMOD/ VDD-core
NT72333/ PWR-3.3V
MT5593U+/ AVDD33-LVDS/
VCC-3V3
G9661
+3V3-AVDD
+1V0-AVDD
MT5593U+/ AVDD10
600 mA
27.5 mA

Philips 55PUS7272/12 Specifications

General

Brand	Philips
Model	55PUS7272/12
Category	TV
Language	English