Resetting the TV
You can choose to reset only the TV picture and audio settings to their
original values, or perform a full factory reset to return the TV to the
state it was in when you first unpacked and turned it on.
Reset audio/video settings
To reset only the TV picture and audio settings to their original values,
navigate to Settings > System > Advanced system settings > Factory
reset, and then highlight Reset TV audio/video settings. Read the
information on the screen to make sure you understand what the
reset operation does.
To proceed with the reset operation, press Play/Pause three times in
a row.
Factory reset everything
A full factory reset returns the TV’s settings to their original state and
removes all personally identifiable information from the TV. When
finished, you must repeat Guided Setup, reconnecting to the Internet,
re-linking your Roku account, and reloading any streaming channels.
You also must repeat Antenna TV setup and input configuration.
Factory reset is the recommended choice if you want to transfer the
TV to another owner, and it is the only choice if you want to switch
from Store mode to Home mode (if you inadvertently selected Store
mode during Guided Setup).
To perform a factory reset, navigate to Settings > System > Advanced
system settings > Factory reset, and then highlight Factory reset
everything. Read the information on the screen to make sure you
understand what this reset operation does.
To proceed with the full factory reset, use the on-screen number pad
to enter the code displayed on the screen, and then select OK to
proceed.
When the factory reset operation completes, the TV restarts and
displays the first Guided Setup screen.
What if I can’t access the Factory Reset option?
It is possible for your TV to get into a state where you cannot access
the various menus, including the menu option that lets you perform
a factory reset operation. If that happens, you can force the TV to reset
by following these steps.
Models with a Reset button
1
Using a straightened paper clip or ball-point pen, press and hold
the recessed Reset button on the TV connector panel.
2
Continue to hold the Reset button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on
dim.
3
Release the Reset button. The TV is now powered off.
4
Turn on the TV and proceed through Guided Setup. See Guided
Setup L p. 16.
Models without a Reset button
1
On the TV panel (not the remote) press and hold down the Mute
and Power buttons.
2
Unplug the TV power, and then plug it in while continuing to hold
down the Mute and Power buttons.
3
When you see the startup screen appear on the TV, release the
buttons.
4
Turn on the TV and proceed through Guided Setup. See Guided
Setup L p. 16.
Network connection reset
If you want to remove your network connection information without
disturbing other settings, navigate from the Home screen to Settings
> System > Advanced systems settings > Network connection
reset, and then select Reset connection.
When you select this option, the TV removes your wireless network
information, including the name of the connection (its SSID) and your
wireless password, if any, and then it restarts. After restarting, your TV
retains all of its other settings and its association with your Roku
account.
After resetting your network connection, navigate from the Home
screen to Settings > Network > Set up new connection to continue
enjoying all of the benefits of your connected TV.
Changing your Roku Channel Store PIN
preference
When you created your Roku account, you were given the
opportunity to create a PIN code and to specify when it must be used.
If you created a Channel Store PIN and want to change it, or you don’t
remember your PIN, or if you didn’t create a Channel Store +PIN and
want to add one, you can easily make these changes.
1
On a computer, tablet, or smartphone, use your web browser to
go to https://my.roku.com and sign in. After signing in, the My
Account page appears.
2
Under PIN Preference, click Update to open the Choose Your
PIN Preferences page.
3
Skip this step if you just want to change your PIN. Otherwise,
choose the option your prefer from among those listed:
●
Require a PIN to make purchases or to add any item from the
Channel Store.
●
Require a PIN to make purchases.
●
Do not require a PIN to make purchases.
4
If you choose either of the first two options, enter your PIN twice
in the appropriate boxes.
5
Click Save Changes to save your changes and return to the My
Account page. Note that your current setting is described under
PIN Preference.
57 .English
To Next Page
Loading...
