Philips AC0650 - Understanding Wi-Fi Indicator Status; Wi-Fi Connection Setup

5EN
Understanding Wi-Fi indicator
Wi-Fi icon status Wi-Fi connection status
Blink in orange Connecting to the smartphone
Stable in orange Connected to the smartphone
Blink in white Connecting to the server
Stable in white Connected to the server
O Wi-Fi function disabled
Wi-Fi connection

1 Download and install the Philips “Air+” app from the App Store or Google Play�
2 Put the plug of the air purier in the power socket and press to turn on the air
purier.
» The Wi-Fi indicator blinks orange for the rst time.
3 Make sure that your smartphone or tablet is successfully connected to your Wi-Fi
network�
Note:
•
Enable Bluetooth feature on your smartphone to ensure the smooth pairing.
4 Launch the Philips “ Air+” app and click on “Add a device” or press the “+” button on the screen�
Follow the onscreen instructions to connect the air purier to your network.
Note:
•
This instruction is only valid when the air purier is being set up for the rst time. If the network has
changed or the setup needs to be performed again, see Chapter "Reset the Wi-Fi connection" on
page 5�
•
If you want to connect more than one air purier to your smartphone or tablet, you have to do this
one by one�
•
Make sure that the distance between your smartphone or tablet and the air purier is less than 10 m
without any obstructions�
Reset the Wi-Fi connection
Note:
•
Reset the Wi-Fi connection when your default network has changed�
1 Put the plug of the air purier in the power socket and press to turn on the air purier.
2 Press for 3 seconds until you hear a beep�
» The air purier goes to pairing mode.
» The Wi-Fi indicator blinks orange�
3 Follow the steps 3-4 in  section�