Philips AC0650 - Factory Reset Procedure; Cleaning and Maintenance; Cleaning Schedule; Cleaning the Air Purifier Body

7EN
Factory reset
Reset the air purier to return to the default status.
•
Press the and button at the same time for 10 seconds until you hear a beep�
4 Cleaning
Note:
•
Never use abrasive, aggressive, or ammable cleaning agents such as bleach or alcohol to clean any
part of the appliance�
Cleaning schedule
Frequency Cleaning method
When necessary
Wipe the surface of the appliance with a soft dry cloth
Clean the air outlet cover
Every four weeks Clean the surface of the lter

Regularly clean the inside and outside of the air purier to prevent dust from collecting.
1 Use a soft, dry cloth to clean both the interior and exterior of the air purier.
2 The air outlet can also be cleaned with a dry, soft cloth�

Wipe the surface of the lter with soft wet cloth or clean the surface of the lter
with a vacuum cleaner�
Note:
•
if you use a high power/ industrial vacuum cleaner, it may damage the lter.
5 Replacing the filter
Understanding the healthy air protect lock
This appliance is equipped with the healthy air protect lock to make sure that the NanoProtect lter
is in optimal condition when the appliance is operating. When the lter is almost expired, the lter
replacement alert ( ) lights up, which indicates that it needs to be replaced.