Philips AC1711 - Display and Light Control

10 EN
Switching the display indicator
Note: The appliance displays PM2.5 level by default.
•
Touch and hold button for 3 seconds to switch display indicator among IAI /
PM2.5.
3s
3s
Usingthelighton/ofunction
With the light sensor, the control panel can automatically turn on, turn o or dim
according to the ambient light. The control panel will be o or dim when the
ambient light is dark. You can touch any button to wake up all lights. Then, if no
further operation, all lights will be o or dim again to match with the ambient
light.
You can touch the button manually to turn o all lights and the control panel.
Touch any button to wake up all lights.