Philips AC1711 - Filter Surface Cleaning

12 EN
2 3 5
1 Switch o the air purier and unplug from the power socket.
2 Open the air quality sensor cover.
3 Clean the particle sensor with a damp cotton swab.
4 Dry all parts thoroughly with a dry cotton swab.
5 Close the air quality sensor.
Cleaningthesurfaceofthelter
Filteralertlightstatus Action
The lter cleaning
alert displays on the
screen.
Clean the surface of the lter
with a vacuum cleaner.
1 Switch o the air purier and unplug from the power socket.
2
5
6
3
4
2 Pull the back cover and remove it from the appliance.
3 Pull the lter from the appliance.
4 Clean the surface of the lter with a vacuum cleaner.
5 Put the lter back into the appliance.