Philips AC1715 - Filter Maintenance; Particle Sensor and Filter Surface Cleaning

12 EN
Cleaning the particle sensor
Clean the particle sensor every 2 months for optimal functioning of the appliance.
Note:
•
If the air purier is used in a dusty environment, it may need to be cleaned more
often�
•
If the humidity level in the room is very high, condensation may develop on the
particle sensor and the air quality light may indicate a more poor air quality even
though the air quality is actually good. If this occurs, clean the particle sensor.
2 3 5
1 Switch o the air purier and unplug from the power socket.
2 Open the air quality sensor cover.
3 Clean the particle sensor with a damp cotton swab.
4 Dry all parts thoroughly with a dry cotton swab.
5 Close the air quality sensor.
Cleaningthesurfaceofthelter
Filteralertlightstatus Action
The lter cleaning
alert displays on the
screen.
Clean the surface of the lter
with a vacuum cleaner.
1 Switch o the air purier and unplug from the power socket.