Philips AC1715 - Initial Setup; Power Connection and Wi-Fi Configuration

7EN
Connecting power
Note: Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull the
cord.
Connect the power adapter to:
• First, the power socket on the appliance.
• Then, the wall outlet.
Wi-Ficonnection
SettinguptheWi-Ficonnectionforthersttime
1 Download and install the Philips “Clean Home+” app from the
App Store or Google Play�
2 Put the plug of the air purier in the power socket and touch to
turn on the air purier.
» The Wi-Fi indicator blinks orange for the rst time.
3 Make sure that your smartphone or tablet is successfully connected to your
Wi-Fi network.
4 Launch the “Clean Home+” app and click on “Connect a New Device” or
press the “+” button on the top of the screen. Follow the onscreen instructions
to connect the air purier to your network.
Note:
•
This instruction is only valid when the air purier is being set up for the rst
time. If the network has changed or the setup needs to be performed again, see
Chapter “Reset the Wi-Fi connection” on page 7�
•
If you want to connect more than one air purier to your smartphone or tablet,
you have to do this one by one.
•
Make sure that the distance between your smartphone or tablet and the air
purier is less than 10 m without any obstructions.
•
This App supports the latest versions of Android and iOS. Please check
www.philips.com/cleanhome for the latest update of supported operating
systems and devices.
ResettheWi-Ficonnection
Note:
•
Reset the Wi-Fi connection when your default network has changed.
1 Put the plug of the air purier in the power socket and touch to turn on the
air purier.