Philips AC2889/10R1 - Changing the Fan Speed; Changing the Auto Mode Setting

8 EN
» The air purier operates under
the Pollution mode by default.
» When the air purier is warming
up, "
" displays on the
screen. After measuring the
particulate matter only in the
air, the air purier shows the
PM2.5 level and operates in the
auto mode with displayed on
the screen (g. k).
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3 Touch and hold for 3 seconds to
switch o the air purier.
Note
• If the air purier stays connected
to the electrical outlet after turning
OFF, the air purier will operate
under the previous settings when
turned ON again.
Changing the Auto mode
setting
You can choose the Pollution mode
( ), the Allergen mode ( ), or the
Bacteria & Virus mode (
).
Pollution mode
The specially designed pollution
mode can eectively remove airborne
pollutants such as PM2.5.
• Touch the Auto mode button
to
select the Pollution mode (g. l).
» Auto (A) and
display on the
screen.
Allergen mode
The extra-sensitive allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
• Touch the Auto mode button
to
select the Allergen mode (g. m).
» Auto (A) and
display on the
screen.
Bacteria & Virus mode
The bacteria & virus mode boosts the
airow to quickly reduce bacteria &
viruses.
• Touch the Auto mode button
to
select the Bacteria & Virus mode
(g. n).
» Auto (A) and
display on the
screen.
Changing the fan speed
In addition to the Auto modes, there are
several fan speeds available.
When using the manual fan speed
settings, the purier will still monitor the
air quality, but it will not automatically
adjust the fan speed if it detects
changes in the air quality.
Sleep (SL)
In sleep mode, the air purier operates
quietly on a very low speed.
• Touch the fan speed button
to
select the sleep mode (
) (g. o).
Note
• All the lights will go o in sleep
mode.
• You can turn on the lights manually
by touching .