Philips AC2889/10R1 - Setting the Timer; Using the Light On;Off Function; Switching the Display Mode

9EN
English
Manual
• Touch the fan speed button
repeatedly to select the fan speed
you need (g. p).
Turbo (t)
In turbo mode, the air purier operates
on the highest speed.
• Touch the fan speed button
to
select the turbo mode (
) (g. q).
Setting the timer
With the timer, you can have the air
purier operate for a set number of
hours. When the set time has elapsed,
the air purier will automatically switch
o.
• Touch the timer button
repeatedly to choose the number
of hours you want the air purier to
operate (g. r).
» The timer is available from 1 to
12 hours.
To deactivate the timer, touch the timer
button
repeatedly until "---" displays
on the screen.
Note
• If you set the timer once, next time
you use the timer, it starts from the
previous setting time.
Using the light on/o
function
With the light dimming button, you can
switch on or o the air quality light,
the display screen and the function
indicator if desired.
1 Touch the light dimming button
once, the air quality light will be
dimmed.
2 Touch the light dimming button
again, the air quality light will go o.
3 Touch the light dimming button
for the third time, all lights will be on
again.
Switching the display
mode
The air purier has dual display mode,
PM2.5 display and IAI display.
Note
• The air purier operates in PM2.5
display mode by default.
1 Touch the light dimming button
for 3 seconds to switch to IAI display
mode (g. s).
»
blinks twice.
» The IAI level displays on the
screen.
2 Touch the light dimming button
for 3 seconds again to switch back
to PM2.5 display mode (g. t).
»
blinks twice.
» The actual PM2.5 level displays
on the screen.