8 EN
Wi-Fi setup
Setting up the Wi-Fi connection
for the rst time
1 Download and install the 'Air
Matters' app from the App Store or
Google Play.
2 Put the plug of the air purier in the
power socket and touch to turn
on the air purier.
» The Wi-Fi indicator blinks
orange for the rst time.
3 Make sure that your mobile device
is successfully connected to your
Wi-Fi network.
4 Launch the 'Air Matters' app and
click on the ‘+’ on the top right of
the screen. Follow the onscreen
instructions to connect the air
purier to your network.
5 After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the 'Air Matters'
app for extensive and up-to-date
troubleshooting tips.
Note
• This instruction is only valid when
the air purier is being set up for
the rst time. If the network has
changed or the setup needs to be
performed again, consult section
“Setting up the Wi-Fi connection
when the network has changed” on
page 8.
• If you want to connect more than
one air purier to your smart device,
you have to do this successively.
Complete the set up of one air
purier before you turn on the other
air purier.
• Make sure that the distance
between your mobile device and
the air purier is less than 10 m
without any obstructions.
• This app supports the latest
versions of Android and iOS. Please
check www.philips.com/purier-
compatibility for the latest update
of supported operating systems and
devices.
Setting up the Wi-Fi connection
when the network has changed
Note
• This applies when the default
network to which your purier is
connected has changed.
1 Put the plug of the air purier in the
power socket and touch to turn
on the air purier.
2 Touch and simultaneously for
3 seconds until you hear a beep.
» The air purier goes to pairing
mode.
» The Wi-Fi indicator blinks
orange.
3 Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the rst
time" section.
To Next Page
Loading...
