Philips AC4372 - Resetting the Filter Lock

17
Resetlterlock
After 2 weeks of lter replacement alert,
and the lters are still not replaced. Then, the
purier will not work until the lter is replaced
and the lter lock is reset.
The
goes on along with the lter
replacement indicators (
, , , and
). All indicators are off except
if it has been activated.
, , and buttons
remain active, while
and buttons are
deactive. See “Replace the lters” section to
reset the lter lock.
8 To reattach the front panel, insert the
bottom hooks into the bottom of the
purier rst (1). Then, push the panel
against the body of the purier (2).
9 Press and hold the button for 3
seconds to reset the lter lifetime.
» For AC4372:
, , , and
go off.
3s
» For AC4374: and go off.
3s
EN