Philips AC4374 - Clean the Pre-Filter

16
EN
3 To remove the pre-lter, grab the
two projections and pull the lter
towards you.
4 Use a vacuum cleaner or wash the
pre-lter under a running tap. If
the pre-lter is very dirty, use a soft
brush to brush away the dust.
5 Air dry the pre-lter.
6 Put the pre-lter back into the
purier. Attach all hooks properly to
the purier.
2
1
6 Clean the pre-
filter
Note
• The pre-lter is washable.
• Clean the pre-lter for every two weeks to
ensure optimal functioning of the purier.
• When the pre-lter needs cleaning, the
goes on.
1 Switch o the purier and unplug it.
2 Place your ngers in the recess of
the side panels and gently pull the
top part of the front panel towards
you. Then lift the hooks at the
bottom of the panel out of the top
of the purier.