14
Operating Instructions
5.1 Recording Videos
5.1.1 Video Recording
When the power of the
vehicle is on, the device auto-
matically turns on and starts
recording. Recording will
automatically stop when the
power of the vehicles is off.
Or, press ▲ to stop record-
ing manually at any time.
5.1.2 Emergency Recording
1. When the Collision Detection function is activated, the
device will automatically detect any collision events, and
create an emergency video le. The emergency video
clip will show 30 seconds before and after the event de-
tection. The video le will be saved into the Emergency
Records folder.
2. During video recording, you can manually create an Emer-
gency Recording, to secure a video le of any event that
might happen, with the EasyCapture buttons located
on the device or on the cigarette-lighter adaptor.
3. Press to start the manual Emergency Recording.
4. icon appears on the top right side of the screen, indi-
cating Emergency Recording is ongoing.
5. The system automatically creates emergency video
files. The video files are saved into the Emergency
Records folder.
5.2 Playback Videos
1. Press OK to enter Menu.
5
To Next Page
Loading...
