Philips AJ 3240 - Alarm Functions; Setting alarm times; Alarm wake-up modes; Switching off the alarm

Alc(rm
SETTING THE ALARM
Alarm time
If you wish to use the alarm, then you should first
of all set the alarm time. The alarm time is the
time when you wish to be woken up. You may
set two different alarm times. This can be useful
if, for example, you need to be woken at a
different time at the weekend.
Setting alarm time 1
• Press ALARM 1 button ®. The display will now
show alarm time 1;
• Keep ALARM 1 button (?) pressed and set the
required alarm time with the FAST UP (?) and
the SLOW DOWN @ buttons.
• Release ALARM 1 button (f). The display will
now show the correct time.
• You can check alarm time 1 by simply pressing
the ALARM 1 button (f).
Setting alarm time 2
• Press ALARM 2 button @. The display will now
show alarm time 2:
• Keep ALARM 2 button (?) pressed and set the
required alarm time with the FAST UP (?) and
the SLOW DOWN ® buttons.
• Release ALARM 2 button (?). The display will
now show the correct time.
• You can check alarm time 2 by simply pressing
the ALARM 2 button (?).
ALARM ON _
The clock radio can awaken you in 2 ways by
sliding OFF-RAD-BUZ ( 2 ).
ALARM 1 / ALARM 2_
Wake by radio
• Make sure the volume of the radio is loud
enough to wake you.
• Set ALARM switch to RADIO.
• You will be awakened at the set alarm time by
the radio.
Wake by buzzer
• Set ALARM switch to BUZZER.
• At the set alarm time you will be awakened by
the buzzer.
ALARM OFF _
You can switch off the alarm in 2 ways:
Switching off the alarm for 6 minutes
• Press the SLUMBER OFF/REPEAT ALARM
button With this switch you temporarily
switch off the alarm. After six minutes the
alarm (radio or buzzer) will sound again. If you
press the SLUMBER OFF/REPEAT ALARM
button # again, the same will happen. If the
SLUMBER OFF/REPEAT ALARM button (g) is
not pressed again, the alarm will switch itself
off after 59 minutes. The following day the
alarm signal will sound again at the set alarm
time.
Switching off the alarm completely
• Set the ALARM switches to OFF. On the
display the ALARM indicator will disappear and
the alarm is now switched off. If you wish to be
awakened the following day again, you must
reset the ALARM switch to RADIO or BUZZER
before going asleep.
5
English