Philips AJ 3630 - Troubleshooting Common Issues; No Sound or Poor Reception; Alarm Not Functioning

TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE REMEDY |
- The volume is not set to the
proper leve!
- The setting of the ALARM
switch s incorrect
— No sound
e Turn VOLUME 43 to adjust
the sound level.
e Set the ALARM switch @
properly
~ Broadcast cannot be received. | -Insufficient antenna input e Rotate the set for best
reception
- Norse from other electrical
equipment with thermostats
—In FM mode crackling sounds
occur from time to time
(especially in weak signal
areas)
e Adjust the power cord for
best reception
e Rotate the set for best
reception.
- In AM mode continuous
crackling and hiss noises
occur
- These noises are caused by
lightning, fluorescent lamps,
motors or engines,
thermostats and other
electrical equipment
- The set is used near a TV,
computer and so on
e Use the set apart from TV,
computer and so on
e Set the alarm time
e Set the correct time
- The alarm ts not set.
— The current time is not correct
— The alarm does not function