Philips AJ 3630 - Product Controls Overview; Setting Time and Alarms; Radio Operation and Sound; Alarm and Slumber Functions

CONTROLS
ysi¡6uz
CONTROLS
(Y) TIME - to set time
© ALARM 1 - to set alarm time 1
© 4 - fast forward
®© ALARM
— OFF -alarm is switched off
— 1-to wake by radio at alarm time 1
— 2-to wake by buzzer at alarm time 2
— 1+2- to wake at both alarm time 1 and
alarmtime 2
(s) RADIO switch:
— ON -radio is switched on
— OFF - radio is switched off
(6) Y - slow backward
@ ALARM 2 to set alarm time 2
SLUMBER - to slumber/set slumber time
(@) ALARM RESET - to switch off the alarm for
24 hours
REPEAT ALARM/SLUMBER OFF
— to switch off the alarm temporarily
— to switch off slumber function
017 Clock display
— shows the time
— ALARM and PM indicators (PM indicator not all
versions)
(42) VOLUME - to adjust sound level
43) Nightlight
BAND SWITCH - for waveband selection
4
INSTALLATION
4 NIGHTLIGHT ON/OFF - to switch the
nightlight on and off
NIGHTLIGHT HI/LO - to adjust the brightness
of the nightlight
47 TUNING - for station selection
MAINS CONNECTION
e Check if the mains voltage as shown on the
type plate on the base of the set corresponds to
your local mains supply.
If it does not, consult your dealer or service
organisation.
— As soon as you insert the mains plug into the
wall socket, the figures on the display will blink.
This means that you must set the correct time.