Philips AJ1003 - Program Radio Stations Manually

1 Press SOURCE repeatedly to turn on the radio.
2 Press and hold SET TIME/PROG for 2 seconds.
» All available stations are programmed in the order of
waveband reception strength.
» 
Program radio stations manually
Note

You can program a maximum of 20 preset radio stations.
1 Press SOURCE repeatedly to turn on the radio.
2 Press +/- (on + TUNING -) repeatedly to tune to a radio
station.
3 Press SET TIME/PROG.
» The number begins to blink.
4 Press PRESET +/PRESET - repeatedly to select a preset
number.
5 Press SET TIME/PROG
6 Repeat the above steps to program more stations.
Tip

To overwrite a programmed station, program another station in
its place.