Philips AJB4300 - Show DAB+ Information

8 EN
2 Press + TUNING/ HR - to scroll through
the menu options:
• [Full scan] (full scan): scan and store all
the available DAB+ radio stations.
• [Manual tune] (manual tune): tune to
aspecicchannel/frequencymanually
and add it to the station list.
• [DRC] (Dynamic Range Compression):
compress the dynamic range of a radio
signal.
• [Prune] (Prune): remove all the invalid
stations from the station list.
• [System] (System): adjust system
settings (see the Chapter "Use system
menu").
3 To select an option, press SELECT.
4 Repeat steps 2 to 3 if any sub-option is
available under one option.
[DRC]
• [DRC off] (DRC off): switch DRC off.
• [DRC high] (DRC high): switch DRC
on to the high level (the default option
recommended for noisy environment).
• [DRC low] (DRC low): switch
DRC on to the low level (the
option recommended for less noisy
environment).
[Prune]
• [No] (no): return to the previous
menu.
• [Yes] (yes): remove all the invalid
stations from the station list.
Note
• If no button is pressed within 10 seconds, the menu
exits.
Show DAB+ information
While listening to DAB+ radio, press INFO
repeatedly to scroll through the following
information (if available):
» Station name
» Dynamic Label Segment (DLS)
» Program type (PTY)
» Ensemble Name
» Frequency
» Signal error rate
» Bit rate and audio status
» Codec