Philips AJB4300 - 6 Use System Menu; Set Time and Sync Time; Reset All the Settings; Know the Software Version

11EN
6 Use system
menu
Use the system menus to
• set time and hour format;
• set time synchronization;
• check the software version of this radio;
• update software if necessary; and
• reset the radio to factory default status.
Set time and sync time
1 In DAB/FM mode, press and hold MENU
for two seconds.
2 Press + TUNING/ HR - until [System]
(system) is displayed.
3 Press SELECTtoconrm.
» [TIME] (time) is displayed.
4 Press SELECT again.
» [Set Time] is displayed.
5 Repeat steps 2 to 3 to select an option or
sub-option (if available).
Options Sub-option Function
[Set Time] Set time.
[Set 12/24
hour]
[Set 12 hour] Display time in
12-hour format.
[Set 24 hour] Display time in
24-hour format.
[Auto time
sync]
[No time
sync]
Deactivate time
synchronization.
[Update from
Any]
Synchronize time
with any available
radio stations.
[Update from
FM]
Synchronize time
with FM (RDS)
stations.
[Update
from DAB]
Synchronize
time with DAB+
stations.
Reset all the settings
1 Enter the system menu.
2 Press + TUNING/ HR - repeatedly to
select [Factory Reset] (factory reset).
3 Press SELECTtoconrm.
4 Press + TUNING/ HR - to select an
option.
• [No]: Return to the previous menu.
• [Yes]: Reset the radio to factory
default status.
5 Press SELECTagaintoconrm.
Know the software version
1 Enter the system menu.
2 Press + TUNING/ HR - to select [SW
version] (software version).
3 Press SELECTtoconrm.
» The software version of the radio is
displayed.
Update software
If you want to update the software, contact
WOOX Innovations for help. It is not
recommended to upgrade by yourself.