10 English
Step 2: Cleaning
The parts that come in contact with milk can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast pump parts as this
may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this causes
permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged, your breast
pump does not function properly. To remove the white valve, gently pull at the ribbed tab on the side
of the valve. To clean the white valve, rub it gently between your ngers in warm water with some
dishwashing liquid. Do not insert objects into the white valve, as this may cause damage.
Step 2A: Manual cleaning
Supplies needed:
- Mild dishwashing liquid
- Drinking-quality water
- Soft, clean brush
- Clean tea towel or drying rack
- Clean sink or bowl
1. Rinse all parts under a
running tap with lukewarm
water.
2. Soak all parts for 5 minutes
in warm water with some
mild dishwashing liquid.
3. Clean all parts with a
cleaning brush.
4. Thoroughly rinse all parts
under a running tap with
cold clear water.
5. Leave all parts to air-dry
on a clean tea towel or
drying rack.
Step 2B: Cleaning in the dishwasher
Supplies needed:
- Mild dishwashing liquid or a dishwashing tablet
- Drinking-quality water
Note: Food colorings may discolor parts.
To Next Page
Loading...
