27
English
Note: UT is the AC mains voltage prior to application of the test level. If in the unlikely event the Philips Avent single/
double electric breast pump Premium Plus is locked inoperative in a function by disturbances from other devices
beyond the levels stated in the table above, the device will shut-o completely and restart. In that case make sure the
distance to the other device causing this disturbance is enlarged.
Explanation of symbols
The warning signs and symbols are essential to ensure that you use this device safely and correctly and to protect you and
others from injury. Below you nd the meaning of the warning signs and symbols on the label and in the user manual.
Symbol Explanation
Indicates to follow the instructions for use.
Indicates important information such as warnings and cautions.
Indicates usage tips, additional information or a note.
Indicates the serial number of the breast pump.
Indicates the manufacturer.
Indicates the manufacturing date.
Indicates the compliance with the essential requirements of the Council Directive 93/42/EEC of
14 June 1993 concerning medical devices.
Indicates that the device is a medical device.
Indicates that the part of the appliance that comes into physical contact with the user (also known as the
applied part) is of type BF (Body Floating) according to IEC 60601-1. The applied part is the breast pump kit.
Indicates 'Class II Equipment'. The adapter is double-insulated (Class II).
Indicates manufacturer's catalog number of the breast pump.
Indicates 'direct current'.
Indicates 'alternating current'.
Indicates separate collection for electrical and electronic equipment in accordance with the EU directive.
Electrical waste products should not be disposed of with household waste. See chapter 'Recycling' for
more information.
English
To Next Page
Loading...
