Philips AVENT SCD845 - Preparing for use; Parent unit charging

- 8 -
Preparing for use
Baby unit
Put the power adapter in the baby unit and the adapter in the wall socket�
Parent unit
The parent unit runs ona built-in rechargeable Li-ion battery.
Follow the below steps to charge the parent unit:
1 Put the power adapter in the parent unit and put the adapter in the
wall socket�
- The battery status light turns orange to indicate that the appliance
is charging�
- When the battery is fully charged, the battery status light turns
green continuously�
- When you charge the parent unit for 3 hours, it can be used
cordlessly for approx. 10 hours in ECO mode.
- If the parent unit is switched on during charging, charging takes
approximately twice as long.
20°CEco
1
eco
10 hr=3 hr