Philips AVENT SCD845 - Positioning the baby monitor

- 11 -
Positioning the baby monitor
Warning: The cord of the baby unit presents a potential
strangulation hazard. Make sure that the baby unit and its
cord are at least 1 meter / 3.5 feet away from your baby.
Never place the baby monitor inside the baby’s bed or
playpen.
1 For optimal sound detection, make sure that the baby unit is no
further than 1�5 meter/ 5 feet away from the baby� Make sure that the
baby unit is at least 1 meter/ 3�5 feet away from the baby because of
potential strangulation hazard�
2 Place the parent unit within the operating range of the baby unit�
Make sure it is at least 2�5 meters / 8�2 feet away from the baby unit to
avoid acoustic feedback�
Note: If you use a cordless phone, wireless video, Wi-Fi network,
microwave oven or Bluetooth on 2.4GHz and you experience
interference on either the parent unit or baby unit, move the parent
unit until there is no more interference�
3 There are two ways to position the baby unit:
a Place the baby unit on a stable, level and horizontal surface.
b Mount the baby unit to the wall with screws�
Tip: The wall mount template (see 'Wall mount') to mount the baby
unit to the wall can be found at the end of this user manual�
Tip: Use the provided template to mark the exact location of the screw
holes on the wall�
Tip: Position the baby unit at a higher level to get a good overview of
the baby’s bed or playpen�
>1-1.5m/3.5 -5ft
>2.5m /8.2ft