1. Wash your hands thoroughly
with soap and water.
2. Push the white valve in the
pump body as far as possible.
3. Screw the pump body onto
the bottle.
4. Place the cushion in the
pump body and make sure that
the rim covers the pump body.
4A. Push the inner part of
the cushion into the funnel
against the line (indicated
with an arrow).
5. Place the silicone
diaphragm in the pump body.
5A. Make sure that the silicone
diaphragm ts securely around
the rim by pressing it down
with your thumbs.
6. Push the silicone tube into
the cap.
7. Attach the silicone tube
and cap onto the silicone
diaphragm. Push down the
cap until it is securely in place.
8. Connect the tube(s) to the
motor unit.
9. Insert the adapter into the
wall socket and insert the
small plug at the other end
into the motor unit.
10. The breast pump is now
ready for use.
Note: You can place the
cover over the cushion to
keep the breast pump clean
when you take it with you and
while you are preparing for
expressing.
To Next Page
Loading...
