What to do if my Philips AVENT SCF396 is not charging?
Only use the adapter supplied. Make sure that the adapter has been inserted correctly into the wall socket and that the small plug has been inserted correctly into the motor unit. The breast pump is too cold or too hot for charging. Let the breast pump acclimatize to room temperature for 30 minutes. If the problem persists, contact the Consumer Care Center via www.philips.com/support.
How to adjust suction strength on Philips AVENT SCF396 Breast Pump?
To adjust the suction strength on your Philips Breast Pump, try a lower suction level. When you express for the first time, start with the default suction level (level 5 in stimulation mode, level 11 in expression mode) and adjust as needed. Comfort levels may vary between sessions. Ensure you're using only the parts provided with the pump and check the silicone diaphragm for any damage.
How to stop pain when using Philips Breast Pump?
To reduce pain while using the Philips Breast Pump, choose a suction level that feels comfortable. Ensure your nipple is centered in the cushion. Also, check the silicone diaphragm for damage like cracks or holes. If pain continues, stop using the pump and seek advice from your healthcare provider.
Why is the charging of my Philips Breast Pump taking so long?
Only use the adapter supplied. Make sure that the adapter has been inserted correctly into the wall socket and that the small plug has been inserted correctly into the motor unit. The breast pump is too cold or too hot. It is recommended to charge the breast pump at room temperature. If the problem persists, contact the Consumer Care Center via www.philips.com/support.
Why I do not feel any suction or the suction level is too low on my Philips Breast Pump?
If possible, try a higher suction level. Check if the silicone diaphragm is assembled correctly. Check if the white valve is undamaged and assembled correctly. Check if the other parts of breast pump are intact and assembled correctly. Make sure that the pump is positioned correctly on the breast to allow a seal between breast pump and breast. If you still do not feel any suction, please contact the Consumer Care Center via www.philips.com/support.
What to do if Philips AVENT SCF396 Breast Pump doesn't turn on when plugged in?
If your Philips Breast Pump doesn't switch on when connected to the wall socket, use only the adapter supplied with the pump. Ensure the adapter is correctly inserted into the wall socket and the small plug into the motor unit. Try connecting the adapter to another wall socket and then press and hold the on/off button.
Why Philips AVENT SCF396 is not charging?
If your Philips Breast Pump isn't charging, use only the adapter supplied. Ensure the adapter is correctly inserted into the wall socket and the small plug into the motor unit. If the breast pump is too cold or hot, let it adjust to room temperature for 30 minutes before charging.
What to do if Philips AVENT SCF396 Breast Pump does not switch on?
If your Philips Breast Pump isn't turning on, ensure the battery is charged or connect the pump to a wall socket.
Why is there no suction on my Philips AVENT SCF396?
If you're not feeling suction with your Philips Breast Pump, try increasing the suction level if possible. Check that the silicone diaphragm and white valve are correctly assembled and undamaged. Also, make sure all parts of the breast pump are intact and properly assembled. Ensure the pump is correctly positioned on your breast to create a seal.
Details product components, accessories, and intended use.
Advises on intended use and general safety practices.
Covers potential hazards, electrical safety, hygiene, and damage prevention.
Instructions for initial setup, including cleaning, disinfecting, and charging.
Explains manual, dishwasher cleaning, and disinfecting procedures for parts.
Provides step-by-step guidance for correct assembly, including safety warnings.
Covers cushion size, charging, and basic operation.
Explains motor unit, LED display, modes, and detailed pumping steps.
Instructions for post-use care and guidelines for safe breast milk storage.
Covers bottle safety, assembly, heating, and warnings.
Guidance on choosing teats, compatibility, ordering, and recycling.
Instructions for battery removal and information on warranty and support.
Addresses common problems and provides solutions for the breast pump.
Includes technical specs, supplemental info, storage, EMF, and symbol explanations.
General| Type | Electric |
|---|---|
| Technology | Natural Motion Technology |
| Bottle Compatibility | Philips AVENT bottles |
| BPA Free | Yes |
| Operation | Electric |
| Power Source | Rechargeable battery |
| Breast Shield Size | 25mm |
| Accessories Included | 1 travel bag |
| Display | LCD |
| Material (Flange) | BPA-free |
| Bottle Capacity | 125ml / 260ml |
To Next Page
