Storage conditions
Keep the breast pump out of direct sunlight as prolonged exposure may cause discoloration. Store
the breast pump and its accessories in a safe, clean and dry place.
If the device has been stored in a hot or cold environment, place it in an environment with a
temperature of 20°C (68°F) for 30 minutes to let it reach a temperature within the usage conditions
(5°C to 40°C / 41°F to 104°F) before you use it.
Electromagnetic fields (EMF)
This Philips device complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
Technical information
Single breast pump Double breast pump
Vacuum level Stimulation: -60 to -200 mbar (-45 to -150 mmHg)
Expression: -60 to -360 mbar (-45 to -270 mmHg)
Adjustable in steps of 20 mbar
Intermittent vacuum
Cycle speed 53-120 cycles/min.
Motor unit rated input 5 V d.c. / 1.1 A 5 V d.c. / 1.8 A
Mains adapter rated input External mains adapter 100-240 V a.c. / 50/60 Hz
Adapter type number S009AHz050yyyy The letters "yyyy" represent the output current from
0100 (1000mA) to 0180 (1800mA), increments in steps of 100mA. The
letter "z" denotes type of plug, it can be: U, V, B, S, C, A, D, K, T, I, E, F.
Mains adapter rated
output
5 V d.c. / 1.1 A 5 V d.c. / 1.8 A
Operating conditions Temperature 5°C to 40°C (41°F to 104°F)
Relative humidity 15 to 90% (non-condensing)
Storage and
transportation conditions
Temperature -25°C to 70°C (-13°F to 158°F)
Relative humidity up to 90% (non-condensing)
Operating pressure 700 - 1060 hPa (<3000m altitude)
Net weight 230g 310g
External dimensions Motor unit: 145 mm x 95 mm x 45 mm (LxWxH)
Device classification IEC 60335-1: System: Class II; motor unit: Class III Construction
Materials ABS, Silicone (motor unit)
Polypropylene, Silicone (other parts)
Service life 500 hours
Mode of operation Continuous operation
22
English
To Next Page
Loading...
Need help?
General
