Philips AZ 1508 - CD Program Management; Programming Track Sequences; Playing and Erasing CD Programs

CD PLAYER
Programming track numbers
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
At most, 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH m or »l
2 As soon as the desired track is displayed, press the PROGRAM
button to store the track in the memory.
- ► program appears in the display. The number of the stored
track, Fr and the total number of stored tracks is shown.
3 Select and store all desired tracks in this way.
5 Pr-
V.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
- ► The display shows all stored track numbers in sequence.
Notes: - If you try to store more than 20 tracks , the display
shows FULL.
- If you press PROGRAM and there is no track
selected the display shows SELECt.
rut i
TULL
pr p ^
5 E LEEb
Playing the program
If you have selected the tracks in the stop position, press
PLAY-PAUSE Ml.
If you have selected the tracks during CD play, first press STOP ■
and then press PLAY-PAUSE Ml.
10 E3SE
[Erasing the program from the stop position _
From the stop position, press STOP ■ . I-
- ► C L E F ir lights up briefly, program disappears and your
program is erased. L LERr
Notes: The program will also be erased if you
- interrupt the power supply
-open the tray or
- press the POWER button.
13
English