Philips AZ 2536 - Technical Specifications

GENERAL
Mains voltage
:
-/01 120V/230 V
:
-/10 240 V
Mains frequency
:
-/01 : 60 Hz/50Hz
:
-/10 : 50 Hz
Battery
mains : 12 V (R20 x 8)
Power consumption
:
Dimension (W x H x D)
:
480 x
260 x 170 mm
AMPLIFIER & MAX PART
Output power mains : 2 x 4 W
battery : 2 x 4 W
Residual noise : 60nW (volume minimum)
Channel difference : 3dB typ. at 500mW
Hum & noise : 500nw (Vol.max.-20dB)
TUNER - FM SECTION
Tuning range : 87.5 - 108 MHz
IF frequency : 10.7 MHz
Sensitivity : < 25 dBf at 26dB S/N
Selectivity : > 20 dB at S9/300kHz
±0.02MHz
IF rejection : > 50 dB
Image rejection : > 20 dB
TUNER - MW SECTION
Tuning range :
:
9kHz 531 - 1602 kHz
10kHz 530 - 1700 kHz
IF frequency : 450 kHz ± 1 kHz
Sensitivity : < 5000 µV/m at 26dB S/N
Selectivity : 16 dB
:
IF rejection ratio 24 dB
:
Image rejection 28 dB
< 24 W
Frequency response :
>
>
>
COMPACT DISC
:
S/N ratio > 50 dB
:
> 5 g
+10dB ±2dB at 100Hz
Channel difference : < 3 dB
:
THD (1KHz,-6dB) <1%
:
THD (10KHz,-20dB) <3%
Crosstalk
1 kHz : > 26 dB
Crosstalk
10 kHz : > 16 dB
at S9/300kHz
(500mW output WOOX ON)
Frequency response : +1dB ±2dB at 10kHz
(500mW output WOOX ON)
Shock resistance
±Z axis
:
> 5 g
±X or ±Y axis
:
35dBAmax.(mode:play/pause)
Acoustical noise
:
45dBAmax. (mode:jump)
2 - 1
SERVICE TOOLS
Audio signal disc SBC 429.......................................................................4822 397 30184
Playability test disc SBC 444
...................................................................4822 397 30245
Test disc 5 (disc without errors ) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A.....................................................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30 dB level without “pause”)
.....4822 397 30155
anti-static table mat
large 1200x650x1.25mm 4822 466 10953
small 600x650x1.25m 4822 466 10958
anti-static wristband
4822 395 10223
connection box (3 press stud connections, 1MΩ) 4822 320 11307
extendible cable (2m, 2MΩ, to connect wristband to connection box) 4822 320 11305
connecting cable (3m, 2MΩ, to connect table mat to connection box) 4822 320 11306
earth cable (1MΩ, to connect any product to mat or to connection box) 4822 320 11308
KIT ESD3 (combining all 6 prior products - small table mat) 4822 310 10671
wristband tester 4822 344 13999
AVAILABLE ESD PROTECTION EQUIPMENT
TECHNICAL SPECIFICATIONS